Maintenance Manual of the Laser Engraving Machine

1.Filling greasing up oil to direct guide 

As we probably are aware, the smoke and residue which is created by the etching and cutting will hurt the guide rail after a time of use, so we have to do the day by day upkeep of the guide rail. If you don't mind turn off the laser etching machine and cut the force, clean the guide rail with clean think about, at that point please drop the greasing up oil on the guide rail, attempt to move the slide bar and ensure that the oil comes into it. Make the slide pole proceed onward the guide rail in the wake of filling the oil, presently we have to introduce the guide rail initially, kindly don't fix the guide rail initially, introduce the sinks the correct position and keep the slide beam on the even level. At that point fix the belt and slide bar well, introduce the focal point, and afterward modify the goal of X light. 

2.Clean the reflector and centering mirror 

After a time of use of the laser etching and laser cutting machine, the smoke and residue will hold fast to the outside of the reflector and mirror, which will influence the etching and cutting profundity and will influence the etching and cutting exactness. We have to clean the three reflectors and one centering mirror with unadulterated liquor week by week. 

3.Oil-filling for the bearing 

A laser etching machine is furnished with loads of heading, to keep the great etching and cutting outcome, some portion of orientation should be topped off with oil normally (aside from the oil-holding bearing). Wipe off the surface residue on the holding on for the perfect think about, take a bit of injector and suck some motor oil inside, at that point fill the holding on for pinhead and move the bearing simultaneously. 

4.Adjustment of coordinated belt 

There are some coordinated belts on one laser etching machine if the simultaneous belt is too free which will bring about the twofold pictures of the engraved words if the coordinated belt is too close which will bring about the scraped area of the coordinated belt. After a time of use, it would be ideal if you alter the rigid screws of the simultaneous belt, modify the coordinated belt until its level of snugness is reasonable, it is sufficient when there are no two old pictures of the engraved words and the clamor of the laser etching and laser cutting machine is exceptionally low, or you can counsel our expert. 

5.Maintenance of the laser tube 

The laser container of the laser etching machine is utilizing the cycle water as a cooling framework and as time goes on, there will be some firings inside the laser tube. We can place a little vinegar into the cycle water, the vinegar will soften the furing. From that point onward, we will utilize some perfect water to clean the cylinder. So the laser cylinder will be in the best working condition and its life will turn out to be longer.

We are a professional laser engraving machine manufacturer and have a variety of laser engraving machines for sale, If you want to buy a laser engraving machine, Emitlaser will give you the best price.